|
Post by Tim Glodoski on Feb 5, 2016 22:05:53 GMT -5
I have a 2016 pol 120 that I am replacing the valve springs in for the 1st time and for whatever reason I can remove the exhaust side with no trouble, but can't seem to get the spring to compress off the 2 small clips to remove the spring on the intake side. It's just really stuck to the point where I can not compress the spring at all. Did Polaris change something or am I missing something simple. This is the 1st time doing this myself but have been shown how to do it once and both sides came off quite easily.
|
|
|
Post by Bob Vehring on Feb 18, 2016 20:26:20 GMT -5
Sorry for the delay, sounds like your keepers are just stuck in the retainer, use the apropriate size socker on the retainer and give it a good pop with a hammer, that should break it loose. Watch so you don't loose the keepers
|
|