|
|
Post by polaris22 on Jan 22, 2014 12:00:42 GMT -5
Whats a good starting point for clutch engagement in the briggs pro 206 class for snowcross. I am running a dragon skin.
|
|
|
|
Post by Jim Donovan on Feb 11, 2014 7:18:05 GMT -5
Be sure to add the 10 gram weights to the two outside springs on each shoe. I would set it up for a firm lock at 2,400rpm. Purple spring in the middle with blues on the outside with 10 gram weights on the blue springs is where I would start. Leave off the snap ring on the outside of the sprocket so you can pull the shoe assembly out to make a quick change. Sand the shoes to get them brown in color and to remove any glaze build up. The clutch has no where to go since you are holding it in place with the bolt and washer so the snap ring isn't really needed.
|
|
